blog:copy_a_filesystem_from_one_computer_to_another_using_tar_and_netcat [Brb wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Copy a filesystem from one computer to another using tar and netcat ======

If you need to transfer an entire filesystem from one machine to another, for example, when you get a new computer, do the following steps.

  * Boot both PCs with any Linux live CD (for example, Knoppix), and make sure they can access each other via the network.
  * On the source machine, mount the partition containing the filesystem to be copied, and start the transfer using netcat and tar:

  cd /mnt/sda1
  tar -czpsf - . | pv -b | nc -l -p 3333

  * On the destination machine, mount the partition to receive the filesystem, and start the process:

  cd /mnt/sda1
  nc 192.168.1.4 3333 | pv -b | tar -xzpsf -

The nc (netcat) command is used for any kind of TCP connections between two hosts. The pv (progress viewer) command is used to display the progress of the transfer. tar is used to archive the files on the source machine and un-archive them on the destination.

{{tag>linux}}

~~LINKBACK~~
~~DISCUSSION~~