Show pageBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Install NUT on ipcop ====== Network ups tools is an open source ups management software, with clean design an flexible configuration. Here is a method to integrate it as a slave into ipcop: - I used a debian 3.0 sarge machine to build the package. I first tried on newer ubuntu 6.1 machine, but got problem with the glib version. - Download source package from http://www.networkupstools.org/, i did this with 2.0.5 - unpack it with tar xzvf - build it according INSTALL ./configure && make - install it to a dedicated directory make DESTDIR=/tmp/package install make DESTDIR=/tmp/package install-conf - This leaves a complete /usr directory tree under /tmp/package - Pack it up with tar czf nut-2.0.5.tgz /tmp/package - Copy it to your ipcop Machine with scp -P 222 {{tag>linux ipcop}} ~~LINKBACK~~ ~~DISCUSSION~~ blog/install_nut_on_ipcop.txt Last modified: 2009/05/20 16:25by brb